Recloser controller
RWK overhead line protection switch intelligent controller is medium voltage overh…
Recloser controller

Recloser controller Recloser controller Recloser controller

Detailed description

  • Description
  • Features
  • Protection
  • Monitoring
  • Data Storage
  • Communication
RWK overhead line protection switch intelligent controller is medium voltage overhead line grid monitoring unit, It can be equipped with RCW(ER) type vacuum circuit breaker for  achieve of automatic monitoring, fault analysis and event records.

Its given to us a safety power grid for cutting line fault and automatic recovery operation and power automation.
RWK series is suitable for up to 35kV outdoor switchgear using, include: vacuum circuit breakers, oil circuit breakers and gas circuit breakers.
RWK intelligent controller is gathering with line protection, control, measurement and monitoring of voltage and current signals integrated automation and control devices outdoors.

RWK is a automatic management unit for single way/multi ways/ring network/two power sourcing, provided with all voltage and current signals and all functions.
RWK column switch intelligent controller supports:
Wireless (GSM/GPRS/CDMA), Ethernet mode, WIFI, optical fiber, power line carrier, RS232/485, RJ45 and other forms of communication, and can access other station premises equipment (such as TTU, FTU, DTU, etc.).
Product mode definition

Password Protection – 2 levels.
50Hz/60Hz systems and two phase/three phase wiring method are available, so that the use scope of device is extended.
Protection configuration is complete, and all protection functions can be switched on and off flexibly.
9-way intellectual switching value input.
Large capacity flash memory can record at least 100 times of historical events, and no data will loss even the power is off.
Circuits operating loop can be used both the direct or alternating current, self-adaptation open/close brake function, which can co-work with various of breakers, and the operation is simple and reliable.
The device has complete self-inspection function to in-service monitor the working conditions of various parts of the device, ensuring the reliability of the device.
79     Auto Reclose(Reclose)
50P     Instantaneous/Definite-Time Overcurrent(P.OC)
51P         Phase Time-Overcurrent(P.Fast curve/P.Delay curve)
50G     Residual Ground Instantaneous/Definite-Time Overcurrent(G.OC)
51G         Residual Ground Time-Overcurrent (G.Fast curve/G.Delay curve)
50N     Neutral Ground Instantaneous/Definite-Time Overcurrent(N.OC)
50SEF     Sensitive  Earth Fault (SEF)
51N         Neutral Ground Time-Overcurrent (N.Fast curve/N.Delay curve)

51c         Cold Load(Cold load)
TRSOTF     Switch-Onto-Fault(SOTF)
81          Frequency protection(Frequency)
67     Negative- Sequence Overcurrent (Nega.Seq.OC)
27     Under  Voltage (L.Under volt)
59          Over Voltage(L.Over volt)
59N     Zero-Sequence Over Voltage(N.Over volt)
Primary/Secondary Phases and Earth Currents
Direction
Primary/Secondary Line and Phase Voltages
Apparent Power and Power Factor
Real and Reactive Power
Historical Demand Record
Positive Phase Sequence Voltage & Current
Negative Phase Sequence Voltage & Current
Zero Phase Sequence Voltage
Frequency
Binary Input/Output status
Trip circuit healthy/failure
Time and date
Fault records
Event records
RS485/USB or RS485/RS232 port and Ethernet/RJ45
Protocols –IEC60870-5-101, IEC60870-5-104, DNP3.0 or Modbus RTU
Event Records
Fault Records
Measurands
Commands
Time Synchronism
Viewing and Changing Settings
Best solution for your power!
Copyright © 2018 Rockwill Electric Group Co.,Ltd. All Rights Reserved.